Display
    - Graphic dot matrix LCD with LED backlighting Transreflective

Display Size
    - 48 x 68 mm (1.89 x 2.67 in.)

Display Resolution
    - 240 x 160 pixels

Height x Width x Depth
    - 144 x 144 x 181 mm (5.7 x 5.7 x 7.1 in.)

Weight
     - 1.70 kg (3.75 lb)

Power Requirements
100 – 240 Vac ±10%, 50/60 Hz / 24 Vdc -15% + 20%

Operating Temperature
-20 to 60°C (-4 to 140°F), 0 to 95% RH non-condensing

Storage Temperature
-20 to 70°C (-4 to 158°F), 0 to 95% RH non-condensing

Analog Output Signal
Two 0/4-20 mA isolated current outputs, max 500Ω

Operational Mode
Primary or secondary measurement or calculated value (dual channel only)

Functional Mode
Linear, Logarithmic, Bi-linear, PID

Optional 3 additional 4-20 mA isolated current outputs,
max 500Ω @ 18-24 Vdc loop-powered or max 350Ω @ 15 Vdc (self-powered)

Security Levels
Two password protected levels

Enclosure Materials
Polycarbonate, Aluminum (powder coated), Stainless Steel

Mounting Configurations
Wall, pole and panel mounting

Enclosure Rating
NEMA4X / IP66

Conduit Openings
1/2" NPT Conduit

Relays
Four electromechanical SPDT (Form C) contacts, 1200W, 5 A, 250 Vac

Operational Mode
Primary or secondary measurement, calculated value (dual channel only) or timer

Functional Mode
Alarm, Timer, Feeder Control, PWM or FM Control, System Alarm

Digital Communication
MODBUS RS232/RS485, Profibus DPV1, or HART 7.2 optional

Memory Backup
Flash memory

Electrical Certifications
EMC
CE compliant for conducted and radiated emissions:
- CISPR 11 (Class A limits)
- EMC Immunity EN 61326-1 (Industrial limits)

Safety
cETLus safety mark for:
- General Locations per ANSI/UL 61010-1 & CAN/CSA C22.2. No. 61010-1
- Hazardous Location Class I, Division 2, Groups A,B,C & D (Zone 2, Group IIC) per FM 3600 / FM 3611 & CSA C22.2 No. 213 M1987 with approved options and appropriately rated Class I, Division 2 or Zone 2 sensors OR cULus safety mark (for Indoor Use Only)
- General Locations per UL 61010-1 & CAN/CSA C22.2. No. 61010-1

Warranty
1 years

Operation
With less than 7W sensor load:
-20~60℃; 0~95% 상대습도(비응축)
With less than 25W sensor load:
-20~40℃; 0~95% 상대습도(비응축)
Storage: -20~70℃;0~95% 상대습도(비응축)

Power Requirement
100~230Vac, 50/60Hz

Display
LCD, 128×64pixels with LED backlighting

Relays
Three SPDT, user-configurable rated 100~230Vac
5Amp resistive max.

Outputs
두개의 아날로그 4~20mA, max. 임피던스 500Ω

Control
PID, High/low phasing, setpoint, deadband,
overfeed timer, off delay and on delay

Alarms
High/Low alarm point, High/Low alarm point
deadband, on/off delay

Communication(Optional)
RS232(MODBUS):Configure and retrieve measured
date for one analyzer using IBM-compatible PC
RS485(MODBUS):Advanced communications/networking
with PLC or SCADA system directly from analyzer.

Memory Backup
All user settings are retained indefinitely in
memory (non-volatile)(EEPROM)

Mounting Configurations
Surface, panel, pipe(horizontal and vertical)

Enclosure: NEMA 4X/IP66

Dimensions: 1/2 DIN; 144×144×150mm

Weight: 1.6kg

Certifications
ETL to UL 61010A-1 and CSA C22.2 No. 1010.1